Installation
23
Q
In-line measuring method
For measurement of tap water, etc., measuring inline can prevent the formation of air bubbles,
and obtain even lower turbidity. To maintain sample pressure, throttle the valve on the outlet
side. The flow rate decreases, but water pressure increases, thus suppressing the formation
of air bubbles. When pressure increases during in-line measurement, samples might leak
slightly from the drain hole of the axis sealed section of the cleaner.
For in-line measurement, an outlet can be provided at a position higher than the detector .
Power source (90 V to
260 V AC)
Zero filter unit (optional)
BV5
BV4
BV1
BV3
BV2
BV6
