Measurement
28
Measurement
Meas. mode
1.
Turn ON the power.
The measurement object is displayed on the measured value display.
The measurable range is displayed with the Meas. mode selected.
If the detector is operating normally, measurements will be automatically started and
measured values will be displayed on the screen.
This state is the Meas. mode.
2.
The on-screen display is changed by pressing the
▲
/
▼
key.
Pressing the ENT key can check or change any pre-defined numerical values during
measurement.
To return from another mode to the Meas. mode, hold down the HOLD key or the ESC
key.
Note
Prior to measurement, be sure to calibrate the detector.
