Overview
7
Description of operation modes and menu items
This equimment offers three types of operation modes and four types of menus.
Q
Operation mode
Meas. mode
In this mode, samples are measured, and transmission signals and relays are controlled.
Cal mode
This mode allows you to perform zero calibration and span calibration.
The
Calibration menu
can be also used to perform a calibration.
Hold mode
In this mode, measurements are stopped to use the
Setting menu, the Calibration menu
or
the User Check menu to carry out processing.
Q
Menu
The following menus are available at the lower levels of the hierarchy of the Hold mode and
the Meas. mode.
For selecting each mode or item, see the corresponding paragraph.
Meas. mode
Cal/Control Value Setting menu
This menu allows you to check the calibrated value or to set/change some controlled values
while checking the output.
Hold mode
Setting menu (SEt)
Prior to operation, this menu allows you to set all the measurement-related parameters, such
as the detector information input and the allocation output.
Cal menu (CAL)
This menu is used to perform zero calibration or span calibration of the turbidity detector.
User Check menu (USr)
This menu allows you to check the output status, the measured value, and other data. The set
values can be reset to the factory settings.
