Regulations
Conformable Directive
This equipment conforms to the following directives and standards:
J
Installation Environment
This product is designed for the following environment.
z
Installation Categories II
z
Pollution degree 2
FCC Rules
Any changes or modifications not expressly approved by the party responsible for compliance
shall void the user's authority to operate the equipment.
J
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Directives:
the EMC Directive 2004/108/EC
the Low Voltage Directive 2006/95/EC
Standards:
[the EMC Directive]
EN61326-1: 2006 Class A, industry
[the Low Voltage Directive] EN61010-1: 2001
Note
If the sensor cable, transmission cable, or relay cable is extended to 30 m or more, the
surge test in the EMC Directive for CE Marking is not applicable.
