Measurement
30
Table 1 List of items displayed in Meas. mode
Screen 1
Screen 2
Condition
Description
Action
Remarks
Measured value
display screen
Measured values,
the unit of measure,
and the type of
standard turbidity
substances are
displayed.
When rly
type is
set to
"non"
Relay Setting
Conditions screen
(The numeral at the
lower left indicates
the relay number.)
Relay 1 is not used.
“- - - - “ indicates
that a relay is not
used.
When rly
type is
set to
"AL"
Relay Setting
Conditions screen
(The numeral at the
lower left indicates
the relay number.)
Settings for the
upper and lower
limits of turbidity are
displayed.
The set value can
be changed.
The input range
changes with the
placement of the
decimal point.
0 to 10.00
0 to 100.0
0 to 1000 degrees
When rly
type is
set to
"AL"
Delay time screen
Displays or
specifies delay time
in seconds.
Input range
0 to 600 (s)
When
“
Hold
”
is
set
Delay time screen
Displays or
specifies delay time
in seconds.
Input range
0 to 600 (s)
When
“
CLn
”
is
set
This screen shows
that Relay 2 will
output while it is in
the “old” state
during cleaning and
after cleaning.
When
“
trg
”
is
set
This screen shows
that Relay 2 is in
the “trigger output”
state after cleaning.
