Installation
19
J
Connecting the detector cable
Q
Precautions for the detector cable
Turn OFF the power source during the connecting work.
Q
Connections
The following terminals are available for the detector cable.
Based on the illustrated below, connect the detector cable correctly to each corresponding
terminal in the terminal block.
J
Connecting the automatic cleaner cable
The automatic cleaner is connected to the exclusive-use connector of the detector.
If the automatic cleaner is not in use, place the cover over the connector on the detector side
to prevent the connector from getting wet.
1: Power source
+
12 V
2: Power source
0 V
3: Communications
+
4: Communications
−
5: Grounding
1 2 3 4 5
