Holtek HT-IDE, User Manual

Page: 63 / 258

•
Sequence number (No)
For any of the trigger modes, the sequence number of a trigger point is
+0. The trace records before and after the trigger point are numbered
using negative and positive line numbers respectively. If all the fields of
the Trace Record Fields (in the Debug Option of Option menu) are
selected, the result is as shown in Fig 5-6. If No trigger mode is selected
or the trigger point has not yet occurred, the sequence number starts from
-00001 and decreases 1 sequentially for the trace records (Fig 5-7).
•
Program count (PC)
The program count of the instruction in this trace record.
•
Machine code (CODE)
The machine code of this instruction.
•
Disassembled instruction (INSTRUCTION)
The disassembled mnemonic instruction is disassembled using an HT-
IDE utility.
•
Execution data (DAT)
The data content to be executed (read/write).
•
External signal status (3)
The external signal 0 ~ 3 denotes the external signal ET0 ~ ET3 respectively.
•
Source file name with a line number (FILE-LINE)
The source file name and the line number of this instruction.
•
Source file (SOURCE)
The source line statement (including symbols).
All the above fields are optional except the sequence number which is
always displayed.
Fig 5-7
Chapter 5 HT-IDE Menu – Debug
53