manualshive.com logo in svg

Holtek HT-IDE, User Manual, Page: 18 / 258

Share
Download
Holtek HT-IDE User Manual Download Page 18

Software installation

•

Step 1
Insert the HT-IDE Setup diskette into the appropriate floppy drive

•

Step 2

–

For Windows 3.1
Run Windows and select Program Manager
Select drive A or drive B

–

For Windows 95
Click “My Computer”
Double click drive A or drive B

•

Step 3
Double click SETUP.EXE, the following figure (Fig 1-4) is displayed.

–

Press the <Continue> button to start setting up the HT-IDE. Then go
to step 4.

–

Press the <Exit> button to exit from the setup procedure. A dialog box
will request confirmation that an Exit command is the correct one.

–

Press the <Help> button to get user help.

                  Fig 1-4

•

Step 4
Type in the destination directory name for the HT-IDE files. The setup
program will copy all files into this destination directory (Fig 1-5).

–

Press the <Continue> button to go to step 5.

–

Press the <Back> button to go to step 3, Fig 1-4 is displayed again.

–

Press the <Exit> button to exit from the setup procedure. A dialog box
will request confirmation of this command.

–

Press the Help button to get user help.

HT-IDE User’s Guide

8

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments