manualshive.com logo in svg

Holtek HT-IDE, User Manual, Page: 155 / 258

Share
Download
Holtek HT-IDE User Manual Download Page 155

C h a p t e r   1 3

µ

C VROM Editor

(HT-VDS827)

Introduction

The HT827XX series of processors are 8-bit high performance microcontrollers
with voice synthesizers and tone generators. Holtek provides a HT-VDS827
utility software package that compresses speech source files, with formats
such as .WAV, .PCM or ADPCM files, in order to save voice ROM space. An
uncompressed binary file can also be loaded as an LCD pattern file.

In the following sections, a quick overveiw for the 

µ

C voice microcontrollers

is given. The voice ROM editor, HT-Voice Editor and HT-Bin Editor is
explained in more detail.

Quick Start for 

µ

C Voice Microcontrollers

The purpose of this section is to quickly obtain familiarisation with the 

µ

C Voice

Development System. If this is the first time that the system is used we strongly
recommend that you read this section first and follow the step-by-step guide.

In this section, a step-by-step guide is first introduced, followed by the
resources supported by the system and several examples which are ex-
plained in detail. Finally, in the last part of this section, some useful
information is provided.

Step-by-Step guide

In order to create a voice microcontroller application, it is necessary to
create a new project and edit sound tracks to be used within the program,
before writing the application program.

13

Chapter 13   

µ

C VROM Editor (HT-VDS827)

145

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments