manualshive.com logo in svg

Holtek HT-IDE, User Manual

The "Holtek HT-IDE" User Manual is a comprehensive resource for users of this advanced product. Packed with detailed instructions and useful information, this manual is essential for maximizing the potential of your Holtek HT-IDE. Download the complete manual for free from our website, manualshive.com, and unlock the product's full capabilities.

Share
Download
background image

Condition A and Condition B specify the trigger conditions. The format of
condition A or B is the same as that of the breakpoint.

The Loop Count specifies the number of occurrences of the specified condi-
tion A. It is used only when the Trigger Mode is from one of the last two
modes in the above list.

The Forward Rate specifies the approximate rate of the trace recording
information between the trigger point and stop trace point in the whole
trace buffer. The trigger point divides the trace buffer into two parts, before
and after trigger point. The forward rate is used to limit the trace recording
scope after the trigger point. The percentage is adjustable between 0 and
100%.

Note

It is not necessary for the trace recording scope to be equal to the forward
rate. If a breakpoint is met before reaching the trace recording scope or a
trace stop command (refer to: To stop the trace mechanism) is issued, the
trace recording will be stopped.

A Qualify list box records and displays all qualifiers used by the Trace
Mode. Up to 20 qualifiers can be added into the list box and and up to 6
qualifiers can be effective. A Qualifier can be disabled or deleted from the
list box. The format of each qualifier in the Qualify list box has the same
format as the breakpoint in the breakpoint list box (refer to the section on
Breakpoints, Format of breakpoints list box)

To stop the trace mechanism

There are 3 methods to stop the trace recording mechanism:

•

Set the trigger point (Trigger Mode) and Forward Rate as shown above

•

Set breakpoints to stop the the emulation and the trace recording.

•

Issue a Trace Stop command from the Debug menu (Fig 5-2) to stop the
trace recording.

Fig 5-4 lists all the requirements to use the trace mechanism. This is the
result of the Trace command from the Debug menu.

→

To set the trace mode

•

Choose the Trace command from the Debug Menu
A Trace dialog box is displayed as in Fig 5-4 .

•

Choose a trace mode from the Trace Mode pull-down list box

•

Press the OK button

Chapter 5   HT-IDE Menu – Debug

49

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments

Related manuals for HT-IDE

Texas Instruments INA193EVM User Manual preview
INA193EVM
Brand: Texas Instruments Pages: 8
Aaeon UP-CHT01 User Manual preview
UP-CHT01
Brand: Aaeon Pages: 30
ASROCK X99 OC Formula User Manual preview
X99 OC Formula
Brand: ASROCK Pages: 221
IBASE Technology MB997 User Manual preview
MB997
Brand: IBASE Technology Pages: 84
NXP Semiconductors PCA9959HN-ARD Manual preview
PCA9959HN-ARD
Brand: NXP Semiconductors Pages: 32
MSI MS-7758 (v3.x) Manual preview
MS-7758 (v3.x)
Brand: MSI Pages: 92
Texas Instruments TAS5508-5142K7EVM User Manual preview
TAS5508-5142K7EVM
Brand: Texas Instruments Pages: 20
Texas Instruments Chipset TRF2436EVM User Manual preview
Chipset TRF2436EVM
Brand: Texas Instruments Pages: 11
HONDA marine BF135 Wiring Diagram preview
BF135
Brand: HONDA marine Pages: 2
Socket MS8158D Series Manual preview
MS8158D Series
Brand: Socket Pages: 37
ST UM0920 User Manual preview
UM0920
Brand: ST Pages: 14
Ublox IRIS-W10 Series User Manual preview
IRIS-W10 Series
Brand: Ublox Pages: 43
PC Chips M598LMR User Manual preview
M598LMR
Brand: PC Chips Pages: 49
DFI Qseven Q7A-551 User Manual preview
Qseven Q7A-551
Brand: DFI Pages: 29
DFI Q7-100 User Manual preview
Q7-100
Brand: DFI Pages: 31
DFI SD330 User Manual preview
SD330
Brand: DFI Pages: 61
Fujitsu AD11 Manual preview
AD11
Brand: Fujitsu Pages: 64
Bosch Worcester TDS 300 Installation And Operating Instructions Manual preview
Worcester TDS 300
Brand: Bosch Pages: 84

Brands by name

Popular brands

Load more brands