manualshive.com logo in svg

Holtek HT-IDE, User Manual

The "Holtek HT-IDE" User Manual is a comprehensive resource for users of this advanced product. Packed with detailed instructions and useful information, this manual is essential for maximizing the potential of your Holtek HT-IDE. Download the complete manual for free from our website, manualshive.com, and unlock the product's full capabilities.

Share
Download
background image

A0035

RAM-space limit exceeded
The total memory size of data sections exceeds the allowed RAM
size.                                                                                                    

A0036

ROM-space limit exceeded 
The total memory size of code sections exceeds the allowed ROM
size.                                                                                                    

A0037

DC could be used in code section only
This directive can not be used in the data section.                         

A0038 

End of file encountered in MACRO definition
The directive ENDM is missing in the MACRO definition block
(unbalanced).                                                                                    

A0039

Constant expected 
A constant is required in the expression.                                        

A0040

Open procedure 
A directive ENDP is required to match the previous PROC.         

A0041 Block 

nesting 

error

The block nesting of directive PROC/ENDP is illegal.                   

A0042

’ expected
The single quote ’ is missing.                                                           

A0043

Non-digit in number
The number token contains a non-digit character.                        

A0044

EXTERN needs an identifier
There is no identifier specified in the EXTERN directive.             

A0045

Data type expected 
The data type of the identifier should be declared.                        

A0046

Unknown data type

 

The data type is unknown.                                                               

A0047

’:’ expected 
The ’:’ is missing.                                                                              

A0048

Too many local labels
Too many local labels defined. At most 10 local labels are
permitted between two labels.                                                         

A0049

Redefined Section in ROMBANK is inconsistent
A section has already been declared in another ROMBANK
directive.                                                                                           

A0050

Bank out of range
The bank number specified in the ROMBANK directive exceeds
the maximum bank number.                                                           

Appendix B   Cross Assembler Error Message

233

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments

Related manuals for HT-IDE

Yamaha T8 Rigging Manual preview
T8
Brand: Yamaha Pages: 497
QDI P2S Manual preview
P2S
Brand: QDI Pages: 69
IEI Technology PCISA-6770-RS Quick Installation Manual preview
PCISA-6770-RS
Brand: IEI Technology Pages: 8
JETWAY BA-500PRO User Manual preview
BA-500PRO
Brand: JETWAY Pages: 58
Gigabyte Z370 AORUS Gaming 7 User Manual preview
Z370 AORUS Gaming 7
Brand: Gigabyte Pages: 48
Aaeon SBC-770 User Manual preview
SBC-770
Brand: Aaeon Pages: 111
Memec Virtex-4 User Manual preview
Virtex-4
Brand: Memec Pages: 45
Global American 3307800 User Manual preview
3307800
Brand: Global American Pages: 135
Kontron COMe Ref.Carrier T6 User Information preview
COMe Ref.Carrier T6
Brand: Kontron Pages: 41
NXP Semiconductors FRDMDUALK3664EVB User Manual preview
FRDMDUALK3664EVB
Brand: NXP Semiconductors Pages: 17
Aura Light UNLCDHS Product Manual preview
UNLCDHS
Brand: Aura Light Pages: 8
Advantech PCM-9386 Startup Manual preview
PCM-9386
Brand: Advantech Pages: 5
DFI CR100-CRM User Manual preview
CR100-CRM
Brand: DFI Pages: 177
HOLT ADK-5200 Quick Start Manual preview
ADK-5200
Brand: HOLT Pages: 14
Global 3308200 User Manual preview
3308200
Brand: Global Pages: 33
TYAN S2507S Manual preview
S2507S
Brand: TYAN Pages: 47
SOYO SY-P4-645DX DRAGON Ultra User Manual preview
SY-P4-645DX DRAGON Ultra
Brand: SOYO Pages: 173
Analog Devices EVAL-AD5326DBZ User Manual preview
EVAL-AD5326DBZ
Brand: Analog Devices Pages: 14

Brands by name

Popular brands

Load more brands