manualshive.com logo in svg

Holtek HT-IDE, User Manual, Page: 56 / 258

Share
Download
Holtek HT-IDE User Manual Download Page 56

→

To add a breakpoint

•

Choose the Breakpoint command from the Debug menu (or press the hot
key Ctrl+B)
A breakpoint dialog box is displayed (Fig 5-3)

•

Designate the descriptive items of the breakpoint
Set Space, Location items
Set Content item and Read/Write check box if Space is the data space
Set External signals if necessary

•

Press the Add button to add this breakpoint to the Breakpoint list box.

•

Press the OK button to confirm

Note

If the total count of the effective breakpoints is less than 3, the newly added
one will take effect automatically after it has been added.
If the breakpoints list box is full, with 20 breakpoints, the Add button is
disabled and no more breakpoints can be added.

                       Fig 5-3

→

To delete a breakpoint

•

Choose the Breakpoint command from the Debug menu or press the hot
key Ctrl+B
A breakpoint dialog box is displayed (Fig 5-3)

•

Choose or highlight the breakpoint to be deleted from the breakpoint list
box

•

Press the Delete button to delete this breakpoint from the breakpoints list
box

•

Press the OK button to confirm

HT-IDE User’s Guide

46

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments