Holtek HT-IDE, User Manual, Page: 190 / 258

Change the pattern
•
Use the "Delete a pattern" method to delete the selected pattern, then use
the Add a new pattern method to change the pattern. Or ..
•
In Fig 14-2, select the COM/SEG position of the selected pattern and
double click the mouse. The Pattern Information dialog box, in Fig 14-6,
is then displayed. Select a pattern from the Pattern List box and press
the [OK] button.
Change the pattern position
•
In Fig 14-2, use the Select-Drag-Drop method to move the pattern directly
onto the panel screen. Or ...
•
In Fig 14-2, double click the COM/SEG position of the selected pattern.
The Pattern Information dialog box, in Fig 14-6, is displayed. Set the X,
Y value of the new position and press the [OK] button.
When above operations have been completed and the screen returns to Fig
14-2, click the Save command of the File menu or click the Save button on
the toolbar. The panel file has now been created or modified.
Simulate the LCD
Before starting the LCD simulation, ensure that the correrct panel file is
referred to by the HT-LCDS. It is dependent upon the following two
situations:
Still in LCD simulation mode when exiting from HT-IDE
If the HT-LCDS was in simulation mode the last time the HT-IDE was
exited, it will return to this mode the next time HT-IDE is run. The
HT-LCDS will reference the panel file with the same name as the project
name. The LCD simulation can be terminated when starting the HT-IDE.
In HT-LCDS environment
Click the LCD Simulator command of the Tools menu, in Fig 14-1, to enter
the HT-LCDS environment. Fig 14-2 is displayed.
•
Click the S button on the toolbar. The HT-LCDS begins LCD simulation
and the corresponding panel file is referenced. This will be the panel file
with the same name as the project’s.
•
Open a panel file which may not be the corresponding panel file of the
current project. Click the S button on the toolbar. The HT-LCDS will
begin LCD simulation and the corresponding panel file referemced.
HT-IDE User’s Guide
180