manualshive.com logo in svg

Holtek HT-IDE, User Manual, Page: 38 / 258

Share
Download
Holtek HT-IDE User Manual Download Page 38

•

Trace record fields
This location specifies the information to be displayed when issuing the
Trace List command, contained within the Window menu. For each
source file instruction, the information will be displayed in the same order
as that of the items in the dialog box, from top to the bottom. If no item
has been selected, the next selected item will be moved forward. The
default trace list will display the file name and line number only. The
de-assembled instruction is obtained from the machine code, and the
source line is obtained from the source file. The execution data is Read
data if the execution is a read operation only, and it is Write data if the
execution is a write only or read and write operation. The external signal
status has no effect if the simulation mode is selected.

•

Stepping command
Selects the automatic call procedure step option, namely Step Into or Step
Over. Only one option can be selected.

•

Connection port
Selects the PC connection port for the HT-ICE. One PC parallel port,
LPT1, LPT2 or LPT3 can be selected for connection to the HT-ICE. The
connection port has no effect if the simulation mode is selected.

•

Mode
Selects the HT-IDE working mode as either simulation or emulation
mode. If the HT-ICE is connected to the host machine and powered on,
the HT-IDE can be selected to be either in emulation or simulation mode.
Otherwise, simulation mode is the only option.

HT-IDE User’s Guide

28

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments