manualshive.com logo in svg

Holtek HT-IDE, User Manual, Page: 52 / 258

Share
Download
Holtek HT-IDE User Manual Download Page 52

The two step commands, Step Into and Step Over, in the automatic mode
are set using the Debug sub-menu of the Options menu

•

To start automatic single step mode
Choose the Stepping command from the Debug menu
also choose the stepping speed (the step command is set in the Debug
command from the Options menu)

•

To end automatic single step mode
Choose the Stop command from the Debug menu

•

To change automatic single step command for the automatic mode

–

Choose the Debug command from the Options menu

–

Choose the Step Into or the Step Over command in the Stepping
command box

•

To start Step Into
Choose the Step Into command from the Debug menu
or press the hot key F8
or press the Step Into button on the toolbar

•

To start Step Over
Choose the Step Over command of the Debug menu
or press the hot key F10
or press the Step Over button on the toolbar

•

To start Step Out
Choose the Step Out command of the Debug menu
or press the hot key Shift+F7
or press the Step Out button on the toolbar

Breakpoints

The HT-IDE provides a powerful breakpoint mechanism which accepts
various forms of conditioning including program address, source line num-
ber and symbolic breakpoint, etc.

Breakpoint features 

The following are the main features of the HT-IDE breakpoint mechanism:

•

At most 3 breakpoints with equal priority can take effect at any instant

•

Any breakpoint will be recorded in the breakpoints list box after it is set,
however this breakpoint may not be immediately effective. It can be set
to be effective later, as long as it is not deleted, i.e.still in the breakpoints
list box.

•

It is acceptable to add at most 20 breakpoints to the list box simultane-
ously. At least one breakpoint should be deleted first, if a 21st breakpoint
is to be added.

HT-IDE User’s Guide

42

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments