Holtek HT-IDE User Manual Download Page 34 | Manualshive

Page: 34 / 258

background image

Download voice

This command downloads the contents of a specified voice data file .VOC to
the HT-ICE for emulation. It also uploads from the HT-ICE VROM saving
the data to a specified .VOC file. Fig 3-11 displays the dialogue box which
shows the name of the downloaded voice file .VOC, which was generated by
the VROM Editor. The size box displays the voice ROM size in bytes for the
current project’s microcontroller. When uploading, a different file name
from the project name may be specified to save the contents of the HT-ICE
voice RAM. Ensure that the voice ROM file .VOC has been generated by the
VROM Editor before downloading.

Fig 3-11

LCD simulator

The LCD simulator HT-LCDS, provides a mechanism to simulate the
output of the LCD driver. According to the designed patterns and the
control programs, the HT-LCDS displays the patterns on the screen in real
time. Chapter 14 gives more details on the LCD simulator.

Options Menu

The Options menu (Fig 3-12) provides the following commands which can
set the working parameters for other menus and commands.

Project command

The Project command sets the default parameters used by the Build
command of the Project menu (chapter 4 HT-IDE menu - Project). During
development, the project options may be changed due to the applications
needs. According to the options setting, the HT-IDE will generate a proper
task file for these options when issuing the Build command of the Project
menu. The dialog box (Fig 3-13) is used for setting the options of the Project.

HT-IDE User’s Guide

24

«
...
32
33
34
35
36
...
»

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments

Related manuals for HT-IDE

Industrial NUC-J6412

Brand: ASROCK Pages: 2

Side-Power SEP IP Series

Brand: SLEIPNER MOTOR AS Pages: 28

Brand: Intel Pages: 80

Brand: J&W Pages: 28

Brand: Aaeon Pages: 65

Brand: Embest Pages: 91

Brand: Biostar Pages: 54

Brand: Arbor Technology Pages: 86

Brand: CHAINTECH Pages: 59

Brand: Supero Pages: 107

Brand: ON Semiconductor Pages: 8

Brand: XFX Pages: 120

Brand: NXP Semiconductors Pages: 40

Brand: Erreka Pages: 4

Brand: Apex Digital Pages: 5

Brand: Advantech Pages: 66

Brand: AIC Pages: 54

Brand: ASROCK Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands