manualshive.com logo in svg

Holtek HT-IDE, User Manual

The "Holtek HT-IDE" User Manual is a comprehensive resource for users of this advanced product. Packed with detailed instructions and useful information, this manual is essential for maximizing the potential of your Holtek HT-IDE. Download the complete manual for free from our website, manualshive.com, and unlock the product's full capabilities.

Share
Download
background image

A p p e n d i x   C

Cross Linker
Error Messages

L1001

No object files specified 
No object file is specified in the command line or the batch file.
Check the command line HLINK syntax, refer to chapter 10.      

L1002

Object file ’filename.obj’ not found in pass1
The specified object file filename.obj is not found in HLINK pass1
Check if the file (filename.obj) is in the working directory,
otherwise contact dealer.                                                                 

L1003

Out of memory
No enough memory space for Cross Linker (HLINK)
Check the total system free memory.                                              

L1004

Illegal section address ’dddd’ 
The section address specified in the command line option /ADDR
is illegal
The address dddd should be in hex. Refer to chapter 10, section
10.2                                                                                                    

L1005

Illegal command option ’option’
The specified option (option) in the command line is illegal
Refer to chapter 10, section 10.2 for legal options.                         

L1006

Batch file ’lbatch.bat’ is not found
The specified batch file lbatch.bat is not found
Check if the batch file (lbatch.bat) is in the working directory.    

L1007 

Illegal file name ’filename.obj’
The specified file filename.obj contains illegal characters
Correct the characters of the file filename.obj                                

C

Appendix C   Cross Linker Error Messages

235

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments

Related manuals for HT-IDE

Danbit MB800 User Manual preview
MB800
Brand: Danbit Pages: 70
Biostar BI94GS-IAC Setup Manual preview
BI94GS-IAC
Brand: Biostar Pages: 53
Safran STIM277H User Manual preview
STIM277H
Brand: Safran Pages: 26
Datavan DTV-05C User Manual preview
DTV-05C
Brand: Datavan Pages: 15
Linear Analog Devices DC2605A Demo Manual preview
Analog Devices DC2605A
Brand: Linear Pages: 16
Korenix JetBox 9310 Series User Manual preview
JetBox 9310 Series
Brand: Korenix Pages: 21
Sure Electronics Wondom ICP3 User Manual preview
Wondom ICP3
Brand: Sure Electronics Pages: 32
Texas Instruments DRV8428 User Manual preview
DRV8428
Brand: Texas Instruments Pages: 16
Gigabyte GA-P35T-DS3P User Manual preview
GA-P35T-DS3P
Brand: Gigabyte Pages: 104
ASROCK CONROE1333-ESATA2 Quick Installation Manual preview
CONROE1333-ESATA2
Brand: ASROCK Pages: 226
Mercury jet 20 Manual preview
jet 20
Brand: Mercury Pages: 57
Gigabyte MDH11TI Quick Reference Manual preview
MDH11TI
Brand: Gigabyte Pages: 2
ON Semiconductor NCP1095GEVB User Manual preview
NCP1095GEVB
Brand: ON Semiconductor Pages: 5
Peak PCAN-MicroMod User Manual preview
PCAN-MicroMod
Brand: Peak Pages: 33
Zeal-All ZA-5500AC1 User Manual preview
ZA-5500AC1
Brand: Zeal-All Pages: 9
Advantech MIC-3389 Manual preview
MIC-3389
Brand: Advantech Pages: 84
AXIOMTEK SBC8168 User Manual preview
SBC8168
Brand: AXIOMTEK Pages: 72
Intel Desktop Board D850EMD2 Quick Reference preview
Desktop Board D850EMD2
Brand: Intel Pages: 24

Brands by name

Popular brands

Load more brands