manualshive.com logo in svg

Holtek HT-IDE, User Manual

The "Holtek HT-IDE" User Manual is a comprehensive resource for users of this advanced product. Packed with detailed instructions and useful information, this manual is essential for maximizing the potential of your Holtek HT-IDE. Download the complete manual for free from our website, manualshive.com, and unlock the product's full capabilities.

Share
Download
background image

L1008

Command line syntax error 
The syntax of the command line is incorrect.
Please refer to chapter 10, section 10.2 for correct syntax.            

L1009

Illegal object file ’filename.obj’
The format of the specified object file (filename.obj) is incorrect
Check if this object file has been generated by Holtek’s Cross
Assembler.                                                                                        

L1010

Cannot close object file ’filename.obj’
HLINK has failed to close the specified object file (system error)
Contact dealer.                                                                                  

L1011

Record ’rec-name’ check sum error
HLINK found a check sum error in the record ’rec-name’ of the
specified object file
Check if this object file is generated by Cross Assembler (HASM)
or not.                                                                                                

L1012

Microcontroller information mismatch

 

file ’filename1.obj’ and ’filename2.obj’ 
Two object files with different uC configurations during assembly
Ensure the same uC configuration during assembling                  

L1013

Library file ’libname.lib’ does not exist
The specified library file libname.lib does not exist or the library
file has not been generated by Holtek’s Cross Library (HLIB).
Check if the library file (libname.lib) is in the working directory.

L1014

Cannot close the library file ’filename.lib’
HLINK has failed to close the specified file.
Contact dealer.                                                                                  

1015

Library file ’libname.lib’ not found 
HLINK cannot re-open the specified library file libname.lib while
processing the link work
Contact dealer.                                                                                  

L1016

Object file ’filename.obj’ not found in pass2
The specified object file filename.obj not found in the HLINK
pass2
Contact dealer.                                                                                  

L1017

Cannot write the checksum of record ’xx’H
HLINK fails to write check sum of record (xxH) to the output file
Contact dealer.                                                                                  

L1018

Cannot write data of record ’xx’H
HLINK fails to write record (xxH) data to the output file
Check the PC file system and working directory or contact dealer.                                  

                                  

                                  

                                  

      

HT-IDE User’s Guide

236

Summary of Contents for HT-IDE



































































































































































































































































Reviews:

No comments

Related manuals for HT-IDE

Garelick 31600 Assembly Instructions preview
31600
Brand: Garelick Pages: 3
AOpen AK79D-400 1394 Easy Installation Manual preview
AK79D-400 1394
Brand: AOpen Pages: 8
Supero X8QB6-F User Manual preview
X8QB6-F
Brand: Supero Pages: 105
ASROCK N3050B-ITX Manual preview
N3050B-ITX
Brand: ASROCK Pages: 126
Rosch Computer EMB-M4 User Manual preview
EMB-M4
Brand: Rosch Computer Pages: 87
AOpen AK76D Easy Installation Manual preview
AK76D
Brand: AOpen Pages: 8
Abit KV-82 User Manual preview
KV-82
Brand: Abit Pages: 48
Gigabyte GA-8IG User Manual preview
GA-8IG
Brand: Gigabyte Pages: 80
Gigabyte GA-Q270M-D3H User Manual preview
GA-Q270M-D3H
Brand: Gigabyte Pages: 40
Sanela SLZA 30 Instructions For Use Manual preview
SLZA 30
Brand: Sanela Pages: 30
MSI 970A-G46 Series Manual preview
970A-G46 Series
Brand: MSI Pages: 78
Aaeon SBC-770 User Manual preview
SBC-770
Brand: Aaeon Pages: 111
Memec Virtex-4 User Manual preview
Virtex-4
Brand: Memec Pages: 45
Intel DQ45CB - Desktop Board Executive Series Motherboard Technical Product Specification preview
DQ45CB - Desktop Board Executive Series Motherboard
Brand: Intel Pages: 96
ASROCK 4CORE1600-GLAN/M Installation Manual preview
4CORE1600-GLAN/M
Brand: ASROCK Pages: 102
Gigabyte G210-H4G Service Manual preview
G210-H4G
Brand: Gigabyte Pages: 98
OLIMEX ESP8266 Series Upgrade Manual preview
ESP8266 Series
Brand: OLIMEX Pages: 17
Benezan Electronics Beamicon2Basic Installation Manual preview
Beamicon2Basic
Brand: Benezan Electronics Pages: 18

Brands by name

Popular brands

Load more brands