Hitachi IJ UX, Service Manual

Page: 75 / 308

2-55
(4) Circulation system control data (SEQUENCE.TXT)
[Example]
- Code
Refer to the code of above example.
- Sequence name
Refer to the sequence name of above example.
- Result
0: Normal end, 1: Aborted, 2: Abnormal end
- Aborted step No.
Internal management code
- Info1-Info4
Internal management code
*) In case of change the ambient temperature upper limit on the system environment
screen, the before / after temperature value are indicated as below.
Before change: Info1
After change: Info2
(5) Trace data(TRACE.TXT
）
[Example]
№ Cod
e
Sequence name Date Time Information
1 001 Power turned on
time 2014/01/22 9:20:00
2 009 CM clock 2014/01/22 9:20:00 [CCPU], 2014/01/22, 9:20:10,
[MCPU], 2014/01/22, 9:20:10
3 003 Select message 2014/01/22 9:25:35 0001, normal
- Code : refer to the next page.
- Sequence name: refer to the next page
- Info1-Info4 : refer to the each Logging contents
№ Date Start time Finish timeCode Sequence name Result
Aborted
step № info1 info2 info3 info4
1 2011/7/7 7:05:29 0:02:09 160 Eject ink B 3 0 0 0 0 0
2 2011/7/7
7:06:56
1:53:16 208 Noclean-stop 0 0 0 0 0 0
3 2011/7/7 8:06:56 0:05:35 80 Nozzle backwash 3 0 0 0 0 0
4 2011/7/7
9:07:45
0:22:42 32 Ink drainage 3 0 0 0 0 0
5 2011/7/7
10:12:04
0:08:47 176 Eject ink A 0 0 0 0 0 0
6 2011/7/7 11:37:20 0:16:57 192 Clean-stop 0 0 0 0 0 0
7 2011/7/7
12:07:22
0:03:51 96 Gutter cleaning 1 2 0 0 0 0
8 2011/7/7 12:14:45 1:00:00 246 Ambient temp. upper lim. 0 0 40 30 0 0