Hitachi IJ UX, Service Manual

Page: 61 / 308

2-41
[Procedure to upgrade function using upgrade key for UX-D]
1 Turn off the power and install the upgrade-keys on EZJ126 board.
2 Turn on the power.
3 Press Upgrade function setup at the second page of the service maintenance
work screen.
If Prev. menu Next menu is not displayed on the maintenance menu, set the Upgrade
password “UGRS” on the login user selection screen.
Upgrade screen is displayed.
4 Select the items to upgrade then press OK.
5 Exit the maintenance screen then cancel the Upgrade password by using
password protection.
For information on changing to the Upgrade mode with Upgrade password
“UGRS”, refer to “2.1 Setting of service personnel maintenance mode.”
HOME
OK
[Stop ] 2015.07.07 12:45 Upgrade function setup Com=0 Warning
Particle use 1 line
2 line
3 line
4 line
5,6 line
f/2
f/2
f/2
f/3
f/3
Calendar items
Shift code, Time count
Replacement items
Count items
3
NOT supported
48
3
Max registers
Max printing columns 300
240
f/1
f/1.286
f/1.47
f/1.786
f/3
8
supported
99
8
300-2000
1000
f/1
f/1
f/1
f/1
f/3
Number of upgrades available : ４
Number of upgrades used : ０
Cancel
Upgrade code
ＱＳ２０２
ＨＲ２０８
HOME
OK
[Stop ] 2015.07.07 12:45 Upgrade function setup Com=0 Warning
Particle use 1 line
2 line
3 line
4 line
5,6 line
f/2
f/2
f/2
f/3
f/3
Calendar items
Shift code, Time count
Replacement items
Count items
3
NOT supported
48
3
Max registers
Max printing columns 300
240
f/1
f/1.286
f/1.47
f/1.786
f/3
8
supported
99
8
300-2000
1000
f/1
f/1
f/1
f/1
f/3
Number of upgrades available : ４
Number of upgrades used : ４
Cancel
Upgrade code