Hitachi IJ UX, Service Manual

Page: 49 / 308

2-29
2.11 Handling of the warning “Product Speed Matching Error”, etc.
(user environment setup)
●
Displays items of user environment setup screen that can be set in the service personnel
maintenance mode.
Items that can be set in the service personnel maintenance mode (user environment setup
screen)
№
Item Setting value Contents
1
Warning “Product
Speed Matching
Error” Disable
Warning is not displayed even if warning
conditions are met.
Enable
Warning is displayed when warning
conditions are met.
2
Arabic pattern
variation Method 1 Select one of two pattern designs for Arabic
number “2”.
Method 2
3
Minimum character
height value
Set 0 to 50
Sets input range for character height of print
specifications screen.
4
Signal detection in
target sensor
filtering
Disable
Target sensor is off
during target sensor
filtering
Repeat print does
not stop
Sensor chattering
happens during
target sensor filtering
Normal printing
Enable
Target sensor is off
during target sensor
filtering
Repeat print stop
Sensor chattering
happens during
target sensor filtering
Improper Sensor
Position fault occur
5
Print overlap fault
check
Disable Print Overlap Fault” is detected
Enable “Print Overlap Fault” is not detected in error.
6
Add items online
mode
Disable Print items not add when online mode.
24 items Up to 24 print items add when online mode.
100 items Up to 100 print items add when online mode.
7
Continue message
print
SOP15-20
installed
Disable
Continue message print function not
activated.
Enable Continue message print function activated.
8 Message number
Start
Start item number for Continue message
print function.
End
End item number for Continue message print
function.
9
Last data print
display.
Normal
Next print message display on the screen.
Last print
Last printed message display on the screen.
[ Caution ]:
Even if a condition for the warning happens and the print disordered, the warning will not be
displayed when the value is set to “disable”.