Access Controller
·
User Manual
104
Click
Add
button to add a new client linkage. You can select the event source as
Event Linkage
or
Card Linkage
.
Event Linkage
For the event linkage, the alarm event can be divided into four types: device event, alarm input,
door event, and card reader event.
Steps:
1.
Click to select the linkage type as
Event Linkage
, select the access control device as event
source, and select the event type from the dropdown list.
For Device Event, select the detailed event type from the dropdown list.
For Alarm Input, select the type as alarm or alarm recovery and select the alarm input
name from the table.
For Door Event, select the detailed event type and select the door from the table.
For Card Reader Event, select the detailed event type and select the card reader from the
table.
2.
Set the linkage target, select the access control device from the dropdown list as the linkage
target, and switch the property from
to
to enable this function.
Alarm Output
: The alarm output will be triggered for notification.
Access Control Point
: The door status of open, close, remain open, and remain close will
be triggered.
Note:
The door status of open, close, remain open, and remain close cannot
be triggered at the same time.
3.
Click
Save
button to save parameters.
Card Linkage
Steps:
1.
Click to select the linkage type as
Card Linkage
.