Access Controller
·
User Manual
57
Editing Time
Steps:
1.
In the Remote Configuration interface, click
System
->
Time
to configure the time zone.
2.
(Optional) Check
Enable NTP
and configure the NTP server address, the NTP port, and the
synchronization interval.
3.
(Optional) Check
Enable DST
and configure the DST star time, end time and the bias.
4.
Click
Save
to save the settings.
Setting System Maintenance
Steps:
1.
In the Remote Configuration interface, click
System
->
System Maintenance
.
2.
Click
Reboot
to reboot the device.
Or click
Restore Default Settings
to restore the device settings to the default ones, excluding
the IP address.
Or click
Restore All
to restore the device parameters to the default ones. The device should be
activated after restoring.
Note:
The configuration file contains the device parameters.
3.
You can also remote upgrade the device.
1)
In the Remote Upgrade part, select an upgrade file type in the dropdown list.
You can select Controller Upgrade File or Card Reader Upgrade in the drop-down list.
