Access Controller
·
User Manual
88
1)
In the Card Group Name field, input the name for the group as desired.
2)
Click
to set the effective time and expiry time of the card group.
3)
Check the checkbox(es) to select the card(s) to add the card group.
4)
Click
OK
to save the card group.
4.
In the Set Authentication Group panel on the left, click
Add
to pop up the following dialog.
1)
Select the access control point (door) of the device for multiple authentication.
2)
Input the time interval for card swiping.
3)
Select the template of the authentication group from the dropdown list. For details about
setting the template, refer to
Chapter 7.6 Schedule and Template
4)
Select the authentication type of the authentication group from the dropdown list.
Local Authentication:
Authentication by the access control device.
Local Authentication and Remotely Open Door:
Authentication by the access control
device and by the client.
For Local Authentication and Remotely Open Door type, you can check the checkbox to
enable the super password authentication when the access control device is
disconnected with the client.
Local Authentication and Super Password:
Authentication by the access control device
and by the super password.
5)
In the list on the left, the added card group will display. You can click the card group and
click
to add the group to the authentication group.
You can click the added card group and click
to remove it from the authentication
group.
You can also click
or
to set the card swiping order.
5)
Input the
Card Swiping Times
for the selected card group.
Notes:
