Access Controller
·
User Manual
48
5.
Click
Add
to add the device.
Importing Devices in Batch
Purpose:
The devices can be added to the software in batch by inputting the device information in the
pre-defined CSV file.
Steps:
1.
Click
Add
to open the device adding dialog box.
2.
Select
Batch Import
as the adding mode.
3.
Click
Export Template
and save the pre-defined template (CSV file) on your PC.
4.
Open the exported template file and input the required information of the devices to be added
on the corresponding column.
Nickname
: Edit a name for the device as you want.
Adding Mode
: You can input 0, 2, 3, 4, 5, or 6 which indicated different adding modes. 0
indicates that the device is added by IP address or domain name; 2 indicates that the device is
added via IP server; 3 indicates that the device is added via HiDDNS; 4 indicates that the device
is added via EHome protocol; 5 indicates that the device is added by serial port; 6 indicates
that the device is added via Hik-Connect Domain.
Address
: Edit the address of the device. If you set 0 as the adding mode, you should input the
IP address or domain name of the device; if you set 2 as the adding mode, you should input
the IP address of the PC that installs the IP Server; if you set 3 as the adding mode, you should
input
www.hik-online.com
.
Port
: Input the device port No.. The default value is
8000
.
Device Information
: If you set 0 as the adding mode, this field is not required; if you set 2 as
the adding mode, input the device ID registered on the IP Server; if you set 3 as the adding
mode, input the device domain name registered on HiDDNS server; if you set 4 as the adding
mode, input the EHome account; if you set 6 as the adding mode, input the device serial No.
User Name
: Input the device user name. By default, the user name is
admin
.
Password
: Input the device password.
