Access Controller
·
User Manual
51
4.
Edit the device information, including the adding mode, the device name, the device IP address,
port No., user name, and the password.
7.4.4
Network Settings
Purpose:
After adding the access control device, you can set the uploading mode, and set the network
center and wireless communication center.
Select the device in the device list, and click
Modify
to pop up the modifying device information
window.
Click
Network Settings
tab to enter the network settings interface.
Uploading Mode Settings
Purpose
：
You can set the center group for uploading the log via the EHome protocol.
Steps:
1.
Click the
Uploading Mode
tab.
2.
Select the center group in the dropdown list.
3.
Check the
Enable
checkbox to enable the selected center group.
4.
Select the uploading mode in the dropdown list. You can enable
N1/G1
for the main channel
and the backup channel, or select
Close
to disable the main channel or the backup channel.
Note:
The main channel and the backup channel cannot enable N1 or G1 at the same time.
