Access Controller
·
User Manual
52
5.
Click
Save
button to save parameters.
Network Center Settings
You can set the account for EHome protocol in Network Settings page. Then you can add devices
via EHome protocol.
Steps:
1.
Click the
Network Center
tab.
2.
Select the center group in the dropdown list.
3.
Select the address type.
4.
Set the IP address/domain name.
5.
Set the port No. for EHome protocol. By default, the port No. is 7660.
6.
Select the protocol type as EHome.
7.
Set an account name for the network center.
8.
Click
Save
button to save parameters.
Notes:
The account should contain 1 to 32 characters and only letters and numbers are allowed.
The port No. of the wireless network and wired network should be consistent with the port No.
of EHome.
You can set the domain name in Enable NTP area
Time
section in Remote Configuration. For
details, refer to
Time
Wireless Communication Center Settings
Steps:
1.
Click the
Wireless Communication Center
tab.
