Access Controller
·
User Manual
68
Visitor Card
: The card is assigned for visitors. For the Visitor Card, you can set the
Max.
Swipe Times
.
Notes:
The Max. Swipe Times should be between 0 and 255. When your swiping card times is
more than the configured times, card swiping will be invalid.
When set the times as 0, it means the card swiping is unlimited.
4.
Input the password of the card itself in the Card Password field. The card password should
contain 4 to 8 digits.
Note:
The password will be required when the card holder swiping the card to get enter to or
exit from
the door if you enable the card reader authentication mode as
Card and Password
,
Password and Fingerprint
, and
Card, Password, and Fingerprint
. For details,
Chapter 7.8.2
5.
Click
to set the effective time and expiry time of the card.
6.
Select the Card Reader Mode for reading the card No.
Access Controller Reader:
Place the card on the reader of the Access Controller and click
Read
to get the card No.
Card Enrollment Station:
Place the card on the Card Enrollment Station and click
Read
to
get the card No.
Note:
The Card Enrollment Station should connect with the PC running the client. You can
click
Set
Card Enrollment Station
to enter the following dialog.
2)
Select the Card Enrollment Station type.
Note:
Currently, the supported card reader types include DS-K1F100-D8, DS-K1F100-M,
DS-K1F100-D8E, and DS-K1F180-D8E.
3)
Set the serial port No., the baud rate, the timeout value, the buzzing, or the card No.
type.
If the card is M1 card, and if you need to enable the M1 Card Encryption function, you
should check
Enable
checkbox of M1 Card Encryption and click
Modify
to select the
sector.
4)
Click
Save
button to save the settings.
You can click
Restore
Default Value
button to restore the defaults.
