Access Controller
·
User Manual
36
Note:
After adding the device, you should check the device arming status in
Tool
–
Device Arming
Control
. If the device is not armed, you should arm it, or you will not receive the real-time events
via the client software. For details about device arming control, refer
Creating Password
Purpose:
For some devices, you are required to create the password to activate them before they can be
added to the software and work properly.
Note:
This function should be supported by the device.
Steps:
1.
Enter the Device Management page.
2.
On the
Device for Management
or
Online Device
area, check the device status (shown on
Security
column) and select an inactive device.
3.
Click the
Activate
button to pop up the Activation interface.
4.
Create a password in the password field, and confirm the password.
STRONG PASSWORD RECOMMENDED
– We highly recommend you create a strong password
of your own choosing (using a minimum of 8 characters, including upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
