Access Controller
·
User Manual
37
resetting the password monthly or weekly can better protect your product.
5.
(Optional) Enable Hik-Connect service when activating the device if the device supports.
1)
Check
Enable Hik-Connect
checkbox to pop up the Note dialog.
2)
Create a verification code.
3)
Confirm the verification code.
4)
Click
Terms of Service
and
Privacy Policy
to read the requirements.
5)
Click
OK
to enable the Hik-Connect service.
6.
Click
OK
to activate the device.
A “The device is activated.” window pops up when the password is set successfully.
7.
Click
Modify Netinfo
to pop up the Modify Network Parameter interface.
Note:
This function is only available on the
Online Device
area. You can change the device IP
address to the same subnet with your computer if you need to add the device to the software.
8.
Change the device IP address to the same subnet with your computer by either modifying the
IP address manually or checking the checkbox of DHCP.
9.
Input the password set in step 4 and click
OK
to complete the network settings.
