Access Controller
·
User Manual
105
2.
Select the card from the dropdown list and select the access control device as event source.
3.
Select the card reader from the table for triggering.
4.
Set the linkage target, select the access control device from the dropdown list as the linkage
target, and switch the property from
to
to enable this function.
Alarm Output
: The alarm output will be triggered for notification.
5.
Click
Save
button to save parameters.
7.11
Door Status Management
Purpose:
The door status of the added access control device will be displayed in real time. You can check the
door status and the linked event(s) of the selected door. You can control the status of the door and
set the status duration of the doors as well.
7.11.1
Access Control Group Management
Purpose:
Before controlling the door status and setting the status duration, you are required to organize it
into group for convenient management.
Perform the following steps to create the group for the access control device:
Steps:
1.
Click
on the control panel to open the Device Management page.
2.
Click
Group
tab to enter the Group Management interface.
3.
Perform the following steps to add the group.
1)
Click
to open the Add Group dialog box.
2)
Input a group name as you want.
3)
Click
OK
to add the new group to the group list.
You can also check the checkbox
Create Group by Device Name
to create the new group by
