manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 83

-CU    -79

7-7

CAP FRAME

7-7   TB01

7.  Remove the cap frame from the cap 

stretcher.

8.  As shown in Fig. 8, install the cap frame on 

cap in the drive frame. 

Rotate the cap frame as show in the Fig 8 

so that the brim of the cap cannot hit the 

machine. 

Then, push the holder lever in the 2 places 

shown in the arrow in Fig. 8, and install the 

cap frame in the cap drive frame so that so 

that the center guide of the drive frame fits 

the concave area of the cap frame.

Confirm that the cap frame is firmly installed on 

the cap drive frame without any gap.

If there is a gap between the cap frame and the 

cap frame drive or the holder lever does not fit 

the hole of the cap frame, adjust loosen the set  

screw on the hold lever to adjust the position.

Center 

guide

Hold lever

Cap drive 

Fig. 8 

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands