manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 138

-RA    -65

1.  When the machine is stopped, press 

.

2.  Select “NEEDLE”.

3. Press 

 from right submenu.

4.  Select the current needle number you would 

like to change.

5.  Select the needle number to be changed.

12-2

NEEDLE BAR SELECTION

13_2   N701

Needle number 

to be changed

Auto setting

This changes all designated needle numbers at once.

For example, if you want to change all needles numbered “3” to “5”, just select one of the color 

change numbers in which “5” is set, then all color change numbers can be changed into “3”.

Needle number to 

be changed after

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands