manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 263

-S3    -95

1.  Turn on the power switch.

2. Press 

.

After the carriage and frame move slightly, the 

embroidery frame will return to the previous 

position automatically.

3.  Select user or administrator

If password has not been set, the screen will be 

changed as step 5.

4.   Enter the password.

5. Press

.

 

Machine becomes ready for operation.

 USER MANAGEMENT

21_9   U801

22-9

User

Selection of user (Login) at power ON 

The user selection menu will be displayed, 

when User management function has been acti-

vated beforehand.

Administrator

 User man-

agement

CAUTION: To prevent accidents.

The embroidery frame and carriage will move. 

Please keep hands clear for your safety.

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands