HappyJapan HCU2 Instruction Book Download Page 371

Page: 371 / 393

-FO -3

1-1

BASIC INFORMATION OF ONE TOUCH FRAME

FRA-23A2-0

One touch frame (16X22)

FRA-23A0-0

One touch frame base for HCH

HCS*

One touch frame has 3 variations as shown below:

NOTICE:

Before installing one touch frame, select "Tubular square frame" and the frame to be installed, then confirm that

the embroidery pattern falls within the frame's embroidery area.

When changing type of one touch frame, the frame size on the machine must be changed together.

Otherwise, the frame could hit the bed when moving and could fall apart.

FRA-23A3-0

One touch frame (13X15)

FRA-23A4-0

One touch frame (9X6)

FRA-23A1-0

One touch frame base for HCD*, HCU*

2-1

BASIC INFORMATION OF ONE TOUCH FRAME BASE

1_1

When using one touch frame, install the frame base to embroidery machine.

The types of frame base are described below;

NOTICE:

Use appropriate frame base for your embroidery machine.

Summary of Contents for HCU2










































































































































































































































































































































































































Search results

Summary of Contents for HCU2

Reviews:

Brands by name

Popular brands

HappyJapan HCU2, Instruction Book

Search results

Summary of Contents for HCU2

Reviews:

Brands by name

Popular brands