manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 61

-S3    -28

PREPARATION OF PATTERN DATA

5_8a   W831

5-8a

 

Thumbnail view

Displays thumbnails of pattern data and detailed information stored on the selected USB 

memory.

 Press 

 .

 

The display switches to 

 and the 

thumbnail display is turned on.

Default setting is o

ff

 .

When thumbnail display is turned on, thumbnail 

data and information data are automatically 

created in the USB memory.

If there are multiple pattern data with the same 

name in the USB memory, the thumbnails may 

not display properly.

If thumbnails cannot be displayed, 

 or 

 

will be displayed.

In this case, delete the corresponding thumbnail 

data and information data.

Thumbnail Number of stitches

Number of color change number

Height

Width

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands