manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 142

-RA    -68

1.  When the machine is stopped, press 

 .

2. Select “NEEDLE”.

3. Press 

 from right submenu.

4. Press 

. 

The color change data will be saved into memo-

ry.

12-6

NEEDLE BAR SELECTION

13_5   B701

Color change data registration

You can import and apply color change data from saved patterns (Including color change stops) 

to the current pattern. This function lets you apply the same color change data from other 

patterns.

 The color change data is limited to one and the color change numbers are limited to 250.

Color change number

 Press   to return to Menu mode.

 Press   to return to Drive mode.

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands