HappyJapan HCU2, Instruction Book

Page: 3 / 393

-CU -2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ....1-1
WARNING LABELS & THEIR LOCATIONS ...1-2
SETTING UP THE MACHINE
Assemble machine unit ............................2-1
How to carry machine ..............................2-2
Machine installation .................................2-3
Assemble safety sensor (Dealer-installed option) ...2-4
A
ssemble Wide X-carriage (
Dealer
-installed option)
2-4b
Assemble border table (User option) ..... 2-4c
Assemble front table (User option) ..........2-5
Assemble border frame (User option) ....2-5b
Assemble Expand side table (User option) ... 2-5c
Assemble stand (User option) ................2-5e
A
ssemble bobbin thread guide (Dealer-installed option)
.2-6
Grounding instruction (for type of 120V) ..2-7
Disposal of a battery ................................2-7
MAIN PARTS ..............................................3-1
THE CONTROL BOX .................................3-3
DRIVE MODE .............................................3-4
Digital thread tension (Digital thread tension in-
stalled machine) .......................................3-7b
Digital Pressure foot ............................... 3-7c
Speed setting by needle ..........................3-8
Frame change ........................................3-8a
MENU .........................................................3-A
INSERTING A NEEDLE ..............................4-1
SELECT NEEDLES AND THREADS .....4-2
BACKING MATERIALS ............................4-3
BORDER FRAME CLIP ............................4-3a
WINDING
Winding the bobbin (
Dealer-installed option
) ........4-4
Removing the bobbin case ......................4-5
Inserting the bobbin .................................4-5
Adjusting bobbin thread tension ...............4-5
Inserting the bobbin case .........................4-5
THREADING THE MACHINE
How to thread upper thread .....................4-6
HOW TO READ THESE INSTRUCTIONS, SCROLLBAR ....4-8
DISPLAYING THE PATTERN IN SETTING MODE ....4-9
TURNING THE MACHINE ON
How to turn on the machine .....................5-1
How to turn o
ff
the machine ................... 5-1c
Calendar and clock setting .......................5-2
MESSAGES ...............................................5-3
PREPARATION OF PATTERN DATA
Connecting to a PC ..................................5-4
Reading embroidery pattern data from the PC .5-4b
Reading embroidery pattern data ............5-5
Search ......................................................5-8
Thumbnail view ......................................5-8a
Selection of folders ..................................5-9
How to select patterns from memory .......5-A
Erasing patterns from memory ................ 5-B
NEEDLE BAR SELECTION ...................... 5-E
Pressure foot for color number ............... 5-G
Thread tension for color number
(Digital thread tension) ............................ 5-H
SEWING WITH TUBULAR FRAMES
Installing and removing the frame base ...6-1
How to hoop .............................................6-2
Mounting the hoop on the machine ..........6-3
Starting to embroider ...............................6-4
CAP FRAME (User option)
Cap frame settings ...................................7-1
Installing and removing the cap drive frame ... 7-2
Normal cap frames ...................................7-5
Wide cap frames ......................................7-8
Starting to embroider .............................. 7-B
ADJUSTING THE THREAD TENSIONS
/
Standard thread tension ...........................8-1
ADJUSTING THE THREAD TENSIONS
/
Digital thread tension (Dealer-installed option
)
8-1a
ADJUSTING THE LASER POINTER
(Dealer-installed option) ....................................8-2
SEWING
What to do if the thread breaks while sewing .9-1
Stopping and resuming sewing ................9-1
Loss of power while embroidering ...........9-2
Moving the hoop while embroidering and then returning to
the correct location (Position) ..............................9-3
Moving back to the starting point (Origin) .9-3
Going back to the beginning of the design (Top) ....9-4
Placing the design in the center of the selected
embroidery frame (Center) ............................9-4
Rotating and mirroring designs (Convert) ......9-5
Starting in the middle of a design (Position) ... 9-6
POSITION ALIGNMENT BY DEFINING 2 POINTS ...9-8
POSITION ................................................ 9-B
Piece number .......................................... 9-C
Bobbin thread alarm .............................. 9-Ca
Work save ............................................. 9-Ce
REGISTER ............................................... 9-D
Entry ........................................................ 9-E
Return ......................................................9-F
0_1 W831
0-1
The explanation of the option is indicated as follows according to the type.
Dealer-installed option : We recommend that setting and adjustment should be done by
the engineer of your dealer.
User option : You can install it yourself.