manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 52

-UP    -37

TURNING THE MACHINE ON

3_5   U901

5-1c

How to turn off the machine

CAUTION

When turning off the machine, be sure to press 

 

 (Power off) 

key on the control box to turn 

off the machine.

If the power can not be turned off by pressing this key due to a problem with the machine, 

turn off the power with the power switch.

STANDARD CONTROL BOX

10.4” CONTROL BOX  (Option)

ON

OFF

Shutting down...

     ON    If the power can not be turn off

           automatically, turn off the power

     OFF   With the power switch.

1.  . Press and hold 

.on the drive mode or 

menu mode.

 

 

 

 

The power switch is automatically turned “OFF” 

and the machine is turned off.

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands