manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 123

-DA    -71

11-4

PATTERNS IN MEMORY

11_4   Q701

7. Press 

 if the pattern name is not to 

be changed.

The pattern data will be written.

 

Choose the column with 

. 

Then select each digit in the existing name. 

  Select word and press 

.

The pattern data will be written.

The maximum number of characters in a design 

name is eight letters or numbers. 

 All the letters and/or numbers are

                   deleted. 

 Selected letter or number is deleted. 
 Changing name is cancelled.

  The display returns to the view of Step 5.

 Press   to return to Menu mode.

 Press   to return to Drive mode.

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands