manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 11

-CU    -10

2-4b   V419

2-4a

SETTING UP THE MACHINE

Assemble Wide X-carriage

   (Dealer-installed option)

Wide X-carriage is packed separately from 
machine.
When you set machine up, please install this 
carriage to the machine.

1.  Move the left and right carriage brackets 

back and forth by hand to the center 
position.

2.  Attach the wide X carriage to the left and 

right carriage brackets by lightly tightening 

them with the screws (M5x16, 2 on each 

side).

3.  As shown by the circle, press the rear side 

of the wide X carriage so that it touches the 

stepped part of the carriage bracket, and 

tighten the screws 

fi

 rmly.

4.  Loosen the screws (M4x6 4 pieces

, 

M4x10 

1 piece) and remove the X motor cover A.

Carriage bracket (right, left)

Wide X-carriage

Carriage bracket (right, left)

Fixing screw

Carriage bracket

X motor cover A

Wide X-carriage

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands