manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 159

-CU    -161

13-Cc

FRAME CONFIRMATION

13_Cc   W831

12.Press 

 to move the frame to 

the 

 “P3” position.

13.Press 

 .

Point “P3” is now set.

14.Press 

 to move the frame to 

the 

 “P4” position.

15.Press 

 .

Point “P4” is now set.

If a rectangular frame is selected in step 7, a 

screen for renaming the frame will automatically 

appear.

After the frame name change is complete, the 

frame data is registered. Go to step 25.

 CAUTION: To prevent accidents.

The frame moves quickly.

Keep hands away from the frame.

16.If you want to change the frame name, 

press 

 .

P3

P4

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands