HappyJapan HCU2, Instruction Book

Page: 281 / 393

-U2 -188
24-4
ERRORS AND WHAT TO DO
24_4 W831
No. Display Error Solutions Page
193 Thread Catcher Thread catch hook is o
ff
its position.
Limit switch to detect position is not
"OFF".
Please follow the example below:
1. Check whether thread was actually cut
by thread cutting knife. If not, cut thread
and return catch hook to its normal
position.
2. If thread is actually cut, check if thread
catch hook on head has returned to its
position completely. 24-8
203 Install data Error has occurred during update of
program.
Check an update program.
210 Servo serial Servo motor communication error Turn o
ff
the power and turn on the power
after a few seconds.
Make sure that the cable connected to the
servo motor is not damaged or removed.
215 Frm. drive err Frame movement did not complete
during normal movement. (Time over)
If this condition occurs frequently, contact
your Dealer.
217 Frm.drive data Frame movement data loose.
255 Default Error Machine unable to determine format of
pattern data.
Verify format of pattern data and fi x if
necessary.