HappyJapan HCU2, Instruction Book

Page: 34 / 393

-CU -31 3_7c V624
3-7c
DRIVE MODE
Digital Pressure foot
Set the height and range of pressure foot on each needle of the current pattern.
You can be set for each needle bar according to the material, thickness of the cloth and sewing
method.
1. Press and hold .
2. Select the desired needle bar number.
3. Set the “Height”or "Range", by pressing each
.
Step
Height : 0.4mm
Range : 1mm
You can adjust them while lowering the
pressure.
ure foot and checking the actual height.
Setting is returned to the default.
(Height : 1.2mm, Range : 5mm).
Set all needle bars at once.
When the needle bar
number is selected, the moving head
moves in conjunction.
Thickness of the cloth is
detected at time of sewing, and height of
the pressure foot is set automatically.
During sewing, it will not be lower than
the set cloth pressure foot height.
4. Press .
The screen returns to Drive mode.
Setting all needle bars at once
When this key is pressed, all needle bars are set at once.
1. Press .
2. Enter height and press .
3. Enter range and press .
All needle bars are set at once.
Height Range