manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 209

-DA    -110

17-6

QUEUE

1.  According to step 1-8 of “Alter”, select 

patterns.

2.  Select  

.

3.  Select registration No. and press 

.

When pattern data is not displayed on the left 

side on the screen, no pattern data is registered 

in the holder of the setting No. 

 

 Registration is deleted.

4. Press 

.

QUEUE setting is registered as setting No.2.

19_5   NB01

Registration of QUEUE setting

Up to 10 QUEUE settings can be registered.

Once you register QUEUE you can select registered QUEUE setting anytime.

 In case you delete pattern from machine memory, QUEUE setting which has deleted pattern 

will be deleted too. (Erasing patterns from memory    5-B)

 Press   to return to Menu mode.

 Press   to return to Drive mode.

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands