manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 109

-DA    -110

9-Ce

POSITION / WORK SAVE

16_2   S201

Work save

You can save the state (before, during) of  working design (the design displayed on the drive 

mode)  and the selected frame type for the working design.

This allows you to resume work by 

suspend sewing

 and returning to the state before the 

suspend

 of the driving design even after working other designs.

1. Press 

 ”Frame forward”.

2. Press 

 “Save”.

3. Press 

 .

The 

state of working desig

n and 

selected 

frame type have been saved. 

 

 "Save” turn to 

 "Read”. 

 Saving is cancelled.

4. Press 

 to return to Drive mode.

 

Time to save

Selected frame

Number of stitches 

sewn up to now

Stitches of pattern

Save

Save the state of working design and selected frame type.

Working 

design to save

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands