-U2 -182
23-1
SPECIFICATIONS • MAINTENANCE
23_1 X511
Speci
fi
cations
CAUTION: To prevent accidents.
When performing maintenance, be sure to disconnect the power cord.
Oiling
*1 Actual embroidery area will be restricted in accordance with inner frame size.
*2 Actual embroidery area will be restricted in accordance with shape of a cap.
*3 Maximum machine speed may change by sewing condition, such as pattern, material and etc.
Speci
fi
cations are subject to change without notice.
The machine will periodically prompt periodically for lubrication based
on the number of stitches sewn.
When powered on, the machine will display an icon and letter to indi-
cate that lubrication is necessary. 5-3
When oiling the head shaft, please move the head to the left and
set it to needle No. 1.
Too much oil may stain fabrics and threads.
Please lubricate the speci
fi
ed oil locations according to the instruc-
tions below.
Running the machine without proper oiling will damage the machine.
Lint will gather in and around the rotary hook. Rotary hooks then wear
which will cause the threads to break. Please clean lint with a brush
and run the machine idly for 2 ~ 3 minutes.
Place to oil
Place to oil
Voltage
1 phase 100V ~ 115V -10% ~ +5%
1 phase 200V ~ 230V -10% ~ +10%
Electricity consumption
200 Wh
200 Wh
Frequency
50 / 60Hz
Noise level
Under 77dB(A) (at 1.0m away from needle point)
Environmental condition
Temperature 0 ~ 40° C
Moisture 45 ~ 85 %
Dimension
(Width x Height x Depth)
822 mm x 1056 mm x 702 mm, 32.4" x 41.6" x 27.7" (Standard)
1,522 mm x 1056 mm x 702 mm, 59.9" x 34.3" x 30.6" (Wide X-Carriage)
Weight
104 kg (Standard)
113 kg (Wide X-Carriage)
Embroidery area (Y x X)
Standard 400 mm x 600 mm, 15.7" x 23.6" Max.*1
Wide X-Carriage 400 mm x1,200 mm, 15.7" x 47.2" Max.*1
Standard cap frame (Option) 70 mm x 180 mm, 2.8" x 7.1" Max.*2
Wide cap frame (Option) 95 mm x 360 mm, 3.7" x 14.2" Max.*2
Max speed
1,500 rpm *3 (Standard)
1,200 rpm *3 (Wide X-Carriage)
Memory capacity
About 100,000,000 stitches
Registered pattern
3,000 pat.
Summary of Contents for HCU2
