HappyJapan HCU2, Instruction Book

Page: 58 / 393

-S3 -25
Reading pattern data
This reads pattern data and writes into memory.
When the HAPPY format pattern data with *various function settings are read in memory,
various functions such as needle bar selection, pattern data adjustments and etc. will be set
automatically. (It is necessary to set “etc.func read”. 10-3)
In addition to memory media, this machine can read pattern data saved in the PC connected
with “Happy Link LAN”.
Design folder settings on the “Happy Link LAN” is required before reading pattern data.
Please refer to “Happy Link LAN” System INSTRUCTION MANUAL regarding the settings
method.
The pattern data can be read through the designated folder and sub-folders by accessing from
the machine.
If the Happy or Tajima pattern data has Barudan or ZSK *data. (Tajima fi le : DSB [Barudan]
or DSZ [ZSK])
The machine can read HAPPY and Tajima pattern data normally when “Auto” is selected at
SETTING RANGE of SETTING ITEM 7 data format of Pattern read settings on page 10-3.
If the machine dose not read pattern data cannot at “Auto”, please try with other data format
such as Brd (Barudan) or Zsk (Zsk). The machine might be able to read the data. 10-3
5-6
PREPARATION OF PATTERN DATA
5_6 W831
1. Insert the USB fl ash drive into the machine
as described in “Inserting USB fl ash drive”.
2. When the machine is stopped, press .
3. Select “READ”.
4. Select (USB flash drive) or (Pattern
data in the PC).
Indicates pattern data.
TAP : HAPPY
DST : Tajima
DSB : Tajima (Barudan)
DSZ : Tajima (ZSK)
Folder : Contents of folder will be displayed
when you select this icon.
The designs new ID number in the machines memory.
Free memory
Folder
Un-recognized device will be shown with gray color.