HappyJapan HCU2, Instruction Book

Page: 66 / 393

-CU -66
1. When the machine is stopped, press .
2. Select “NEEDLE”.
The screen of color number 1 selection is
displayed.
The current color number is showed in the
pattern data display portion.
Color change stop function
5-F
Selection of color change number
5-F
No thread cut after color change
5-F
Pressure foot for color number
5-G
Thread tension for color number
5-H
(Digital thread tension installed machine)
3. Select the needle number.
After setting the needle number on color number,
the following color number selection is displayed.
You can also select color number directly.
You can switch color change numbers with
if the color change number has more
than 5.
4. Select the needle number on all the color
change numbers.
Press to return to Menu mode.
5-E
NEEDLE BAR SELECTION
5_E V624
For each color change in a given pattern, the needle number loaded with the correct color
thread is assigned by the operator. When this is set, the machine automatically changes to the
programmed needle when the design reaches that point in the course of sewing the design.
You can not setting “NEEDLE” for selected “LOCK” design.
Please release “LOCK” from design. 11-1
Needle number Current color number
Needle number
Color number
Press to on the sub menu to
check the setting.
Number of color number
Digital thread tension (Installed machine)