manualshive.com logo in svg

HappyJapan HCU2, Instruction Book

Share
Download
HappyJapan HCU2 Instruction Book Download Page 266

-RA    -94

LAYOUT

22-C

21_C   U701

Space or Delete

4.  Seelct the pattern

Letter selection

5. Press 

.

6.  Select letter.

Select letters.  One data can contain up to 26 

letters including space.

 The screen is switched to basic script or cyrillic  

          script.

 All the letters are deleted. 

 

 Basic script 

 

 Diacritic script 

 

 Cyrillic script 

 Symbol 

 The screen returns to menu. 
 Selected letter or number is deleted. 

 The cursor moves left and right.

Except for the space between letters, space is elimi-

nated.

7. Press 

 when you are finished with the 

letter selection.

Fix your setting and you can select fonts. 

For fonts, refer to [BUILT-IN FONT LIST].   26-3

Font Selection

8.  Select the font.

Cyrillic script

Basic script (Diacritic)

Cyrillic script

Basic script (Diacritic)

Summary of Contents for HCU2










































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands